User manual

40
CONFIGURATION
 •Enrollee — The projector server will send WPS pairing requests to
other WPS registrars.
Congure via Push Button: Click “Start PBC” to enter WPS Push Button
mode (or press the WPS button on the front of the Wireless Projector
Server). When using this mode, another WPS-compatible wireless
device must also enter WPS Push Button mode with a different WPS
 Congurationmode(e.g.,iftheprojectorserverisplacedintoWPS
Push Button mode using “Registrar,” another WPS-compatible wireless
device must use “Enrollee” and vice versa). NOTE: When “Start PBC”
is clicked, the button will be grayed out and the function will begin a
2-minute countdown: If no WPS-compatible wireless device enters
WPS Push Button mode within 2 minutes, WPS pairing will be
cancelled.
Congure via Client PIN Code: If you have another WPS-compatible
wireless device’s self PIN code, you can enter it here and click “Start
PIN” to begin PIN-style WPS pairing.
5.6 PreseNtatioN coNtrol
Click this option to control the connected users and designate which is
the active presenter.
Administrator mode: Select to enter the mode and gain control of the
users. NOTE: Whenever you enter or leave this mode, the projector
server needs to reboot and all connected users must reconnect to the