User manual

25
BASIC OPERATION
projector server is less than 7 m (approx. 23 ft.). The effective operating
distance is less in some environments, and when the power level of
the remote’s battery is low.
• Ifthere’sastronglightsourceneareitherunit,theremotecontrolmay
not function properly.
4.6 select user
When there’re more than one connected user, the Wireless Projector
Server can select one of them to display content. In the example below,
there are two connected users, neither in presentation mode. An active
user is indicated by a green >, while others (inactive) are white.
You can also use the remote control to select which user displays content:
• Ifapresentationisinprogress,presstheMenubutton,thenpress
either the Prev. or the Next button to select a user. Press the Start
button twice and the display content of the user you selected will be
displayed on the projector server’s display.