User manual

31
CONFIGURATION
USB HD INFORMATION
Eachofformattedpartitions(FAT32,EXT2andEXT3)onanattached
USBstoragedrivewillbepresentedontheUSBHDInfoscreen.The
namingconventionforentriesintheMountingPathcolumnisbasedon
theconnectingport.Forexample,iftheUSBharddriveisattached
throughPortAandtherearetwoformattedprimarypartitionsonthe
disk,theNASwillcreate“USBHDA1”and“USBHDA2”mountingpaths
to represent each partition space.
ADVANCED
Alltheleprotocolsettingsarepresentedinthissubmenu.Disableany
protocolsnotinusebythecomputersonthenetworktoincrease
performance.Mostuserswillnotneedtochangeanyofthesettings.
Remembertoclick“Apply”aftermakinganychanges.
Make any desired changes
inthe“WorkgroupName”
or“ComputerDescription”
eldshere.NOTE: The
workgroupnameshouldbe
thesameforallcomputers
sharingles.
Enable“AppleFileSharing”
forcompatibilitywitholder
Macs (systems earlier than
OS X).