User manual

46
ADDITIONAL FEATURES
Printing via the shared network printer will be slower than when the printer is
connected directly to the USB port on the computer. After you click “Print,” wait for
the printer to receive the data.
1. Connect your USB printer to the USB host port on the Gigabit SATA NAS and
turn both devices on.
2. Log in to make sure the printer server is enabled and the printer has been
recognized.
Once these initial steps are complete, refer either to Section 6.5.1: Installation on
a PC or Section 6.5.2: Installation on a Mac.
6.5.1 Installation on a PC
1. On your PC, go to Start and select “Printers and Faxes.”
2. Go to File and select “Add Printer” to bring up the printer setup wizard.
3. Click “Next” to start the setup wizard.