User manual
26
WEB CONFIGURATION
4.2.4.3 BitTorrent
In this section, you can manage your torrents and add new downloads to the queue.
Before you add the rst job, set a limit for the download and upload speed based
on your network’s bandwidth. After changing the settings, click “Save” to apply the
new conguration. NOTE: If there is no hard drive installed or if the drive isn’t
formatted, this menu is not available.
To start downloading les, you need to download a torrent le from the Internet rst,
then upload it to the NAS. Once the torrent le is added, you can start downloading.
The downloaded les will be stored in your “/public/btdownload” folder.
The BitTorrent client on the Gigabit SATA NAS can download ve les at a time,
with a maximum of 40 les in the queue. Remember to start the download again
if the device has been turned off or rebooted before the le has been downloaded
completely. (Also see Section 6: Additional Features / BitTorrent.)
NOTE: The BitTorrent client on the NAS uses the TCP protocol and the ports 6881-
6889. Make sure those ports are not blocked by your router or its rewall and, if
necessary, set up port forwarding so trafc for those ports is forwarded to the NAS.