User manual

WEB CONFIGURATION

4.2.3.1 LAN Settings

In this section, you can dene the hostname for the NAS and set up the IP

conguration. Selecting “Obtain IP/DNS address automatically” is recommended.

When selecting a hostname, make sure to use a unique name and not one that

has already been used on the local network.

If required, you can also set the individual addresses yourself. If you need help in

manually lling in these elds, contact your network administrator. NOTE: After

making any changes to the settings, click “Save” to apply the new conguration.

4.2.3.2 Time Settings

In this section, you can set the date and time manually or select your time zone

from the drop-down list and use an NTP server to synchronize the time via the

Internet. When setting manually, click “Save” to apply the new time and save the

settings; when synchronizing via the Internet, select the NTP server and click

“Update Time.”

NOTE: To use the NTP function, you need to enter a valid NTP server or select one