User manual

19
WEB CONFIGURATION
4.2 Control Panel
4.2.1 Users and Groups
In this section, the administrator can manage the users and groups for the NAS.
Start by adding your users rst, then create the groups and assign the members
to their groups. NOTE: These settings only apply to the network drive, not when
the drive is connected to the computer directly via USB.
4.2.1.1 User Management
In this section, you can see all existing users for the NAS and manage them by
adding or removing them from the list.
Existing Users — Lists the current users of the Gigabit SATA NAS.
Adding Users — To add a new user, clear the form by clicking “Clear Form” and
ll in a username and password. The description is optional, but it’s
recommended to help manage multiple users. If required, you can create a
private folder for that user and set a limit for the capacity. Once done, click
“Save” to create the new user. To add this user to an existing group, select the
user from the existing users list and click “Groups” for further settings.
Modifying Users — Select the user from the existing users list and modify the
settings. Once done, click “Save” to apply the new settings.
Removing Users — To remove a user, select it from the existing users list and
click “Delete User.”
4.2.1.2 Group Management
In this section, you can see all existing groups for the NAS and manage them by