User manual
16
WEB CONFIGURATION
4 WEB CONFIGURATION
Open your Web browser, enter the IP address of your Gigabit SATA NAS (refer to
Section 3: System Setup / Logging In) and log in. The default login is “admin” for
both the username and the password. The initial screen that displays presents four
primary menu options: Basic, Control Panel, Personal Information and Log Out.
Basic — The settings in this menu are aimed at the user who wants to quickly set
up the LAN disk and share les on the local network. Only the most basic
functions and settings are available, but it is ideal for someone using this
device for the rst time. For a more advanced setup, see 4.2: Control Panel.
Control Panel — This menu includes all the settings and information the Gigabit
SATA NAS offers. You can access specic settings or adjust and modify
everything manually.
Personal Info — This menu is for the system administrator account. It includes the
option to set the password and some others related to the Web interface.
Log Out — This can be used to log out once all the settings have been congured.
NOTE: Without installing and formatting a drive rst, the other functions of the
Gigabit SATA NAS will not be available. The settings options presented in this
section only affect the network drive and do not apply to the USB drive.
4.1 Basic
4.1.1 Quick Setup
As mentioned above, these are basic settings. For detailed explanations, refer to
4.2.1: Users and Group Management, 4.2.2: File and Print or 4.2.3: System.
4.1.1.1 Wizard
The setup wizard can be used to congure all the basic LAN settings for your
network drive.
• PC users, if you’ve followed the setup wizard steps in Section 2, there’s no need
to repeat the procedure unless you want to change some of the settings or you
haven’t yet completed the setup.