User manual
13
SYSTEM SETUP / LOGGING IN
9. The setup wizard will remind you that the
previous settings will now be updated with
the new conguration. Click “OK” to nish
the setup wizard.
Once you’ve identied the IP address (as
conrmed above on the Step 4 screen), you can simply enter that into the URL
address eld of your Web browser to access the Web conguration interface of
your device. NOTE: This option may not work on a Mac.
3.2 Peer to Peer Login
If you connect the Gigabit SATA NAS directly to your computer (PC or Mac) using
Ethernet cable, you can access the device using its default IP: 192.168.1.1. Open
the Web browser and enter 192.168.1.1 to access the Web conguration interface.
NOTE: This option only works when Bonjour is disabled (see 3.4 below).
3.3 Mac Login
When the Bonjour service is disabled, the only way to access the Login screen is
by using its IP address. First, you need to nd out the IP address of your Gigabit
SATA NAS, then use the Web browser to access the Web conguration interface.
1. Turn on the NAS, ensuring it’s connected to the same network as your
computer.
2. Open the Terminal utility, which is usually located in your Applications
folder under Utilities.