User manual

to this mode. This mode is also the default setting.

 Though the adapter is compatible with both 802.11g

and 802.11b wireless stations, if there are only 802.11b wireless

stations in the network, you can set the adapter to this mode.

 When the adapter is set in Ad Hoc (Peer to

Peer) mode, you can designate the wireless connection mode for the

Ad Hoc network.

 Though the adapter is compatible with both 802.11g and

802.11b wireless stations, if there are only 802.11b wireless stations

in the network, you can set the adapter to this mode.

 If you have a mix of 802.11b and 802.11g wireless

stations in your network, it is recommended that the adapter be set

to this mode. This mode is also the default setting.

 Though the adapter is compatible with both 802.11g and

802.11b wireless stations, if there are only 802.11g wireless stations

in the network, you can set the adapter to this mode.

 If you have a mix of 802.11b and 802.11g wireless

stations in the network, it’s recommended that you enable the protection

mechanism, which can decrease the rate of data collisions between

802.11b and 802.11g wireless stations. When the protection mode is

enabled, the throughput of the adapter will be a little lower.

Depending on the status of the network, this automatically

disables/enables the protection mode.

 Always enables the protection mode.

 Always disables the protection mode.

CONFIGURATION