Datasheet

77
CABLE TESTERS
Enhanced Network Cable Tester, RJ-45
• With the Enhanced Network Cable Tester you can test RJ-45 (UTP/STP) cabling with enhanced
function for the following standards: EIA/TIA,568A, 538B, 356A and Token Ring
• Supports the following tests: Wire continuity, type of cabling, shielded (UTP/STP)
• Includes protective leather pouch
350136
Remote Multi-Cable Tester with Auto Shutoff
• The remote cable tester checks the cable before and after installation. The tester offers easy one-step operation.
14 LEDs confi rm testing status and shut off automatically to maximize power saving.
• Testing... RJ-45 = USOC 4/6/8, 10Base-T, EIA/TIA 568 A/B, AT&T258A, Token Ring, BNC
• LEDs = Testing, short, connection, non-parallel 25/50 Ohm termination, screening each conductor
• Includes protective leather pouch
• Auto Shutoff
350143
Professional All-In-One Cable Tester
• LEDs for each wire
• Pin confi guration easy to read
• Test (TX/RX): DB9, DB15, DB25, HDB15, Centronics 36,
BNC, RJ-45, USB A, USB B (optional), 1394 (optional)
• Features auto or manual scan for pin out indicators
350174
Professional Network Cable Tester, RJ-45/BNC
• LEDs for each wire
• Pin confi guration easy to read
• Test: RJ-45, RJ-11 (UTP/STP) and BNC for the following standards: EIA/TIA 356A,
EIA/TIA, 568A/B, AT&T258A, and Token Ring
• Features auto or manual scan for pin out indicators
• Includes 2 x BNC adapter cable, 1 x BNC M/M adapter, 1 x RJ-45 modular cable
• Includes protective leather pouch
503044
Tone Generator and Probe
• Two position switch for single or multi-tone signal
• LEDs for line polarity, continuity and voltage
• Testing leads and modular cables for individual wire tests or modular jack tests
• Plastic tip to prevent accidental shorts
• Trace or identify wire or cables in a bundle or group
515566
Multi Modular Cable Tester, RJ-11/RJ-12/RJ-45
• Test modular functions with RJ-11, RJ-12 and RJ-45 with 4/6/8 termination
• Testing before and after installation possible
• Includes protective leather pouch
350129
LAN Identifi cation Cable Tester
An essential tool for verifying and troubleshooting local area networks.
The compact style designed provides optimal convenience and portability!
Simply push the “Test” button and see:
• If the cable or jack is connected to a hub or network card
• If the hub or network card work in full- or half-duplex
• If the default link speed of the hub or network card is 10 or 100 Mbps
258807
CABLE TESTERS