User`s guide

3
HARDWARE INSTALLATION
LED Indicator
Power (PWR)
The PWR indicator lights green while the Wireless CardBus adapter is
connecting to the CardBus or PCMCIA slot, otherwise, it is off.
ACT (Activity)
The ACT indicator blinks green when the Wireless CardBus Adapter is
connected to a network successfully and transmitting data. Otherwise the
indicator is off whiles the Wireless LAN is stand by.
Check the installation
The LEDs of the Wireless CardBus Adapter are clearly visible and the status of
the network link can be seen instantly:
1. Once the device is plugged to the station’s CardBus slot, the PWR LED of
the Wireless CardBus Adapter will light up indicating a normal status.
2. When the device plugged to the station’s CardBus slot and the driver was
installed, the ACT and PWR LED will start alternate blinking, it means that
the device is starting to scan the wireless devices near the Wireless CardBus
Adapter.
3. While the Wireless CardBus Adapter linked up and transmitting data to the
Access Point or to other Wireless LAN station, the ACT LED will start
blinking.