User`s guide

¾ RTS/CTS Threshold:
The RTS/CTS Threshold is a station initiates the process by sending a RTS
frame, the other ends receives the RTS and responds with a CTS frame, the
station must receive a CTS frame before sending the data frame. This is to
prevent the collisions by each station. Choose a setting within a range of
256 to 2432. It is recommended limiting a long packet to prevent each
station waiting too long to transmit a data.
Profile
The Profile section allows you to set values for all parameters by selecting a
previously defined profile. Type a name in the Profile Name field to create a
profile, click “Save” and click “Apply” when a profile is done. You can click
Delete if the profile is no longer used, to activate other profile, choose a profile
name in the Profile Name field and click Activate.
13