User`s guide

Configuration
The Configuration function helps you to configure the Network and the
Security.
Network: the setting of the Network mode, the Network SSID and the Channel:
¾ Network Mode:
If you want to connect with an Access Point, please set to “Infrastructure”
mode. If you have more stations and just want to set them as local network,
please set the mode to “802.11 Ad-Hoc” mode.
¾ Network SSID:
The SSID differentiates one Wireless LAN group name from another; so
all access points and all devices attempting to connect to a specific
Wireless LAN group name must use the same SSID. A device will not be
permitted to join the BSS unless it can provide the unique SSID.
¾ Channel:
It shows radio channel numbers that used for Wireless LAN networking.
The channel number can be set only under the Ad-Hoc operation mode. In
Ad-Hoc mode stations, each station must have the same channel numbers
and SSID.
In Infrastructure mode, the WLAN CardBus Adapter will automatically
detect the channel number of the Access Point.
Security: the setting of the Network Encryption:
This function is used to protect wireless communication from eavesdropping.
A secondary function of encryption is to prevent unauthorized access to a
wireless network, and it can be achieved by using the Encryption function.
¾ Enable Encryption:
Enable or Disable the WLAN encryption on the WLAN CardBus Adapter.
7