User`s manual

7.13 Wireless Configuration

If you want to use the print server through wireless

LAN, please set up the print server through Ethernet first

and make sure your wireless LAN setting is correct. After

setting the wireless LAN, unplug the Ethernet cable and

restart the print server, then you can start to use the print

server through wireless LAN. If the wireless configuration

does not work, please plug the Ethernet cable again, restart

the print server and configure the print server through

Ethernet until the wireless LAN settings are correct.

The default settings of the print server wireless

function are as follows.



Mode: Ad-Hoc



SSID: Default

 Channel: 11

Double Click “Wireless” icon and the wireless

configuration window will pop-up.