User manual

41
Parameters Description
Trigger Port This is the out going (Outbound) port number for this particular
application
Note: The range of the Trigger Port is only from 0 to 65535.
Trigger Type Select whether the outbound port protocol is TCP or UDP
Public Port Enter the In-coming (Inbound) port or port range for this type of
application (e.g. 2300-2400, 47624)
Note: Individual port numbers are separated by a comma
(e.g. 47624, 5775, 6541 etc.). To input a port range use a “dash”
to separate the two port number range (e.g. 2300-2400)
Public Type Select the Inbound port protocol type: TCP or UDP
Enabled You must tick/check the Enabled box to enable this particular
special application configuration