User manual

29
screen you can also specify the router to act as a Bridge. The WAN settings offer the following
selections for the router’s WAN port, Dynamic IP, PPPoE, PPTP, Static IP Address, DNS and
Bridge.
Parameters Description
2.2.1 Dynamic IP address Your ISP will automatically give you an IP address
2.2.2 PPPoE
Your ISP requires PPPoE connection.
2.2.3 PPTP Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection
.
2.2.4 Static IP address
Your ISP has given you an IP address already
2.2.5 DNS
You can specify a DNS server that you wish to use
2.2.6 Bridge The router can be used as a bridge between LANs
Once you have made a selection, click <More Configuration> at the bottom of the screen and
proceed to the manual’s relevant sub-section
2.2.1 Dynamic IP