User manual

SoftAP

If your computer has another network card connected to the Internet, select it from

the “Name” drop-down menu and click “Enable ICS.” If your computer doesn’t have

another network card with Internet connection, click “Not enable ICS.” The Cong

(Basic Conguration) screen for the AP function will display, providing you with

labeled tabs for access to the ve other primary menu options (in addition to sub-

menus such as Use MAC Address and Security Setting, as detailed below).

SSID — Enter the SSID (the name used to identify this wireless access point) using

up to 32 numerical characters and spaces.

Channel — Select the wireless channel you want to use. The number of channels

available here depends on the setting of “Country Region Code.”

Wireless Mode — Select the operation mode of the access point.

Use Mac Address — Click to use the MAC address of the card as the SSID. An

“AP” prex will be added automatically.

Security Setting — Set the security options (wireless data encryption). Refer to

Section 4.2: Security Settings for details.

SOFTAP

If your computer has another network card connected to the Internet, select it from

the “Name” drop-down menu and click “Enable ICS.” If your computer doesn’t have

another network card with Internet connection, click “Not enable ICS.” The Conﬁ g

(Basic Conﬁ guration) screen for the AP function will display, providing you with

labeled tabs for access to the ﬁ ve other primary menu options (in addition to sub-