User`s manual

80
7.12 System Configuration
Double Click “System” icon and the System
configuration window will pop-up.
In the System configuration page, you can select to
enable/disable each printing or management protocol,
assign name for each printer port of this print server, and
upgrade the new firmware for this print server.
Port Name is the name of the printer port. The Print
Server has three printer ports, two USB 2.0 ports and one
parallel port. Each printer port has to be assigned a name.
Then you can use this name to access the printer port. By
default, the printer port name is “lpt1” for port 1, “lpt2” for
port 2 and “lpt3” for port 3.