User`s manual

73
Click the “IP” button to enter the IP setting page. If
you need the print server to automatically get an IP from
DHCP server, select “Auto IP”. You also can select “Static
IP” to manually assign “IP Address”, “Subnet Mask” and
“Gateway” for the print server.
Click the “DHCP Server” button to enter the DHCP
server’s setting page. You can “Enable/Disable” the DHCP
server and assign a range of IP addresses here. The DHCP
server is disabled by default. When “Enable” is selected,
you have to configure “Starting Address”, “Ending
Address”, “Gateway” and “DNS”. The print server will
assign a unique IP for each client.