Manualshelf

User`s manual

ManualsBrandsIntellinet ManualsNetworking3-Port Parallel Print Server
101102103104105106107108109110
99
8.8 Configuring DHCP Parameters
The print server can be configured as DHCP server to
provide dynamic IP addresses assignment. The DHCP Cfg
page allows you to set.
The DHCP server startup, which determine if the
print server will act as DHCP server. If this item is set to
Auto, the print server will detect if there is any other
DHCP server on the network when it boots up. If there is
no DHCP server on the network, then the print server will
configure as DHCP server itself; otherwise it will disable
this function.
DHCP setting is used to configure TCP/IP
parameters that will be assigned to a DHCP client. If this
item is set to Auto, the print server will determine all