User manual

CONSOLE MANAGEMENT

SOFTWARE UPLOAD

Browse...: Click to nd the new rmware le you want, then click “Upload” to

upgrade the rmware and reboot the switch system. I MPORTANT: During the

upgrade process, don’t turn off the power or any function on the Web page.

LOGOUT

Click to exit the Web management interface.

conSole manaGement

The Gigabit Web-Smart Switch switch provides a console interface for local

conguration through its RS232 port. This is an internal, character-oriented user

interface for system administration, such as resetting factory conguration or changing

some settings.

Direct Access

Direct access to the administration console is achieved by directly connecting a

terminal or a PC equipped with a terminal-emulation program (such as HyperTerminal)

to the switch console port. When using the management method, congure the

terminal-emulation program to use the following default parameters:

• 115200bps

• 8 data bits

• No parity

• 1 stop bit

Logging On

Enter the factory default password. The user default password is “admin”; the super

password is “superword.” Or enter a user-dened password if you change the

factory default password later.

Browse...