User manual

System Configuration
The System Configuration window presents the switch information and allows
the configuration of the switch properties.
MAC Address: The MAC address of this device.
S/W Version: The software version of this device.
IP Address: Set up the IP address of the switch.
Subnet Mask: Set up the subnet mask of the switch.
Gateway: Set up the gateway of the switch.
Management VLAN: The VLAN group that is allowed to access the WEB-based
management interface.
Username: The login name. (default: “admin”)
Password: The login password. (default: “admin”)
System Name: The name of the device.
To save the configuration of the system, click “Apply.” NOTE: After applying a
new IP address, a new login page will be started automatically. Login again
to proceed to other configurations.
8
MANAGEMENT
Gigabit Ethernet Rackmount Managed