User manual

23
SNMP Commands
SNMP Configuration
Description: Show the SNMP configuration.
SNMP Community [<get>|<set>] [<community>]
Description: Set or show community setting for SNMP.
[<get>|<set>]: Community for get or set.
[community]: Community string.
SNMP Setup [enable|disable]
Description: Activate or deactivate the SNMP.
[enable|disable]: Enable/disable SNMP (default: show SNMP mode).
SNMP Trap [<IP Address>]
Description: Set or show SNMP traps destination.
<IP Address>: IP address to send traps to. (default: show trap configuration).
Ratelimit Commands
Ratelimit Configuration
Description: Show the Ratelimit setting.
Ratelimit Setup <traffic type > <option>
Description: Set or show the ratelimit configuration. The allowed frame rates for
ICMP frames, learn frames, multicasts, broadcasts and flooded unicasts are
controlled using a central ratelimit.
[<traffic type>]: Ratelimit to set. Can be one of: [ICMP|Broadcast|Multicast]
(default: show all).
[enable|disable]: Enable or disable specified ratelimit.
[<rate>]: Frame rate in kiloframes. Allowed values: 1k, 2k, 4k, 8k, 16k, 32k, 64k.
Ratelimit Egress [<portlist>] [enable|disable] [<rate>]
Description: Set or show the egress configuration.
[<portlist>]: Port list (default: all ports).
[enable|disable]: Enable or disable egress.
[<rate>]: Disable or set leaky bucket rate in kbps
[128/256/512/1024/2048/3072k] (default: show egress rate).
Ratelimit Ingress[<portlist>] [enable|disable] [<rate>]
Description: Set or show the ingress configuration.
[<portlist>]: Port list (default: all ports).
[enable|disable]: Enable or disable ingress.
[<rate>]: Disable or set leaky bucket rate in kbps
[128/256/512/1024/2048/3072k] (default: show ingress rate).
MANAGEMENT