User manual

1000fdx: 1 Gbps, full duplex.
auto: Auto negotiation of speed and duplex.
Port Flow Control [<portlist>] [enable|disable]
Description: Set or show flow control mode for the port.
[<portlist>]: Port list (default: all ports).
[enable|disable]: Enable/disable flow control (default: show flow control mode).
Port Admin [<portlist>] [enable|disable]
Description: Set or show the admin state for the port.
[<portlist>]: Port list (default: all ports).
[enable|disable]: Enable or disable admin state (default: show admin state).
Port MaxFrame [<portlist>] [<framesize>|reset]
Description: Set or show the maximum frame size in bytes (including FCS) for
frames received on the port. Tagged frames are allowed to be 4 bytes
longer than the maximum frame size. Use the reset option to return to default
setting.
[<portlist>]: Port list (default: all ports).
[<framesize>|reset]: Maximum frame size [1518 – 9216] or reset to 1518 bytes
(default: show maximum frame size).
NOTE: To make the maxframe larger than 1518, [Flow Control] should be enabled.
Port Statistics [<portlist>] [clear]
Description: Show or clear statistics for the port.
[<portlist>]: Port list (default: all ports).
[clear] : Clear port statistics (default: show statistics).
VLAN Commands
VLAN Configuration [<portlist>]
Description: Show the VLAN egress mode, port VLAN ID and accepted frame
type for the port and the permanently stored VLAN table.
[<portlist>]: Port list (default: all ports).
VLAN Add <vidlist> [<portlist>]
Description: Add VLAN entry and include ports in the member set.
<vidlist>: VLAN ID list.
[<portlist>]: Port list (default: all ports).
VLAN Delete <vidlist>
Description: Delete VLAN entry (all ports excluded from member set).
<vidlist>: VLAN ID list.
VLAN Lookup <vidlist>
Description: Lookup VLAN entry and show port list.
<vidlist>: VLAN ID list.
20
MANAGEMENT