User manual

System Restore Default [keepIP]
Description: Restore factory default configuration.
[keepIP]: Preserve IP configuration (default: not preserved).
UserName [<name>]
Description: Set or show the username.
[<name>]: String of up to 16 characters (default: show username).
System Password [<password>]
Description: Set or show the console password. The empty string (“”) disables
the password check.
[<password>]: Password string of up to 16 characters.
System Systemname [<name>]
Description: Set or show the system name.
[<name>]: String of up to 16 characters (default: show systemname).
System Reboot
Description: Reboot the switch.
Console Commands
Console Configuration
Description: Show configured console prompt and timeout.
Console Timeout [<timeout>]
Description: Set or show the console inactivity timeout in seconds. The value
zero disables timeout.
[<timeout>]: Timeout value: 0, 60-10,000 seconds.
Console Prompt [<prompt_string>]
Description: Set or show the console prompt string.
[<prompt_string>]: Command prompt string of up to 10 characters.
Port Commands
Port Configuration [<portlist>]
Description: Show the configured and current speed, duplex mode, flow control
mode and admin state for the port.
[<portlist>]: Port list (default: all ports).
Port Mode [<portlist>] [<mode>]
Description: Set or show the speed and duplex mode for the port.
[<portlist>]: Port list (default: all ports).
[<mode>]: Port speed and duplex mode (default: show configured and current
mode).
10hdx: 10 Mbps, half duplex.
10fdx: 10 Mbps, full duplex.
100hdx: 100 Mbps, half duplex.
100fdx: 100 Mbps, full duplex.
19
MANAGEMENT