User manual

Rate Limit Conﬁguration

Rate Limit manages the bandwidth

for each port and presents the

settings options for Storm Control,

which limits the ﬂow rates of

broadcast and multicast

transmission.

To activate Storm Control:

1. Click on the drop-down menu

to specify a speed for each

frame type.

2. Click “Apply” to execute the

conﬁguration.

SNMP Conﬁguration

The Gigabit Ethernet Rackmount Managed Switch supports SNMP management,

which allows network administrators to monitor and conﬁgure this device with

SNMP software.

To enable SNMP

management of the switch:

1. Select “Enable” on the

drop-down menu.

2. Specify a trap IP. (A

trap IP is the destination

port for sending trap information, which is usually the IP address of network

administrators.)

3. Enter a name in the Community Get ﬁeld. This will be the password for

accessing the management information base (MIB) with read-only authority.

4. Enter a name in the Community Set ﬁeld. This will be the password for

accessing the MIB with both read and write authority.

Discovery

If installing a series of switches, the Discovery management tool helps in

searching for and accessing switches within the LAN.

NOTE: Discovery features a list of the 16 devices (maximum) for auto and

manual modes.

MANAGEMENT