User Manual User guide

WEB MANAGEMENT INTERFACE

Available Networks — This is a list of all wireless access points found

by the camera. Not all access points will be displayed at the same

 time,soiftheAPyouexpectedtoconnecttodoesn’tappearyoumay

need to click “Refresh” several times until it does.

 •Connect:Selectadeviceyouwanttoconnectto.

 •SSID:UnlessawirelessAP’sSSIDishidden(meaningyou’llneed

  toidentifythedevicebyitsMACaddress),it’lldisplayhere.

 •MACAddress:Iftherearealotofwirelessaccesspointsinproximity

  (orifawirelessaccesspointhidesitsSSID),youcanusetheMAC

addresses to distinguish them.

 •Signal:Thisindicatestheradiosignalstrength.

 •Channel:ThisistheWAP’sradiochannel.

 •Encryption:YouneedtousethesameencryptiontypeastheAP