User Manual

Web Managed GbE Switch
40
3.3.4.4 VLAN Ingress Filter
This page allow user to configure VLAN ingress filter setting.
Click Switching > VLAN > VLAN Ingress Filter to access the screen below.
The following table describes the labels on this screen.
LABEL
DESCRIPTION
State
Select Enabled from the drop-down box to enable VLAN Ingress Filter.
Select Disabled to not use VLAN Ingress Filter.
Apply
Click Apply to save your changes to the switch.
3.3.5 SVLAN
3.3.5.1 SVLAN Setting
This page allows the user to configure VLAN stacking tag protocol identifiers.
Click Switching->SVLAN->SVLAN Setting to access the screen below.