User Manual

Web Managed GbE Switch
31
3.2.3 Time
Click Network> Time in the navigation panel to display the screen shown below.
The following table describes the labels on this screen.
LABEL
DESCRIPTION
SNTP State
Select Enable to use Simple Network Time Protocol (SNTP) or Disable
to set the time manually.
SNTP Server
Address
If SNTP is enabled, enter the IP address of the time server you will use.
SNTP Server
Port
It shows the Port Number of SNTP server.
Time
(HH:MM:SS)
If SNTP is disabled, enter the new time in hour, minute and second
format.
Date
(YYYY-MM-DD)
If SNTP is disabled, enter the new date in year, month and day format.