User Manual Instruction Manual

CONFIGURATION

Launch Cong Utility

This starts the conguration utility. It performs the same function as double-

clicking the icon.

Switch to Client + AP Mode

In this mode, the Intellinet Wireless 450N Dual-Band USB Adapter acts as both a

wireless network adapter for your computer and an access point for other wireless

devices to connect to the network. In most cases, this function is not needed and

should not be activated.

Switch to AP Mode

In this mode, the wireless USB adapter acts as an access point for other wireless

devices to connect to the network, but it does not function as a regular wireless

network adapter. In most cases, this function is not needed and should not be

activated.

Windows Zero Conguration Tool (not shown)

In Windows XP, there is a Windows Zero Conguration Tool (WZC) option for

setting up wireless clients. When it’s selected, you will not use the Intellinet WLAN

conguration utility to connect to any wireless network. Instead, you will use the

Windows integrated so-called “Zero Cong” function. If you are experienced in the

use of the Windows Zero conguration function, you can use it instead of the

Intellinet WLAN conguration utility. Unless you plan on using the AP mode

function of the WLAN adapter, there are no disadvantages to using Windows Zero

conguration over the Intellinet WLAN conguration utility. (This user manual only

includes instructions for the Intellinet WLAN conguration utility, however.)

Intellinet WLAN Utility Main Screen