User Manual Instruction Manual

CONFIGURATION

Creating a Prole with WPS

Besides adding a prole manually, you can connect to a wireless network and create

a prole based on WPS technology. Wi-Fi Protected Setup, also known as Wi-Fi

Simple Cong, is a computing standard that attempts to allow easy establishment

of a secure wireless home network. It lets you join a secure wireless network simply

by pushing a button or entering a PIN code) — without entering a complicated

password. WPS is still relatively new, and some wireless routers, especially older

models, don’t support it. If you’re not sure whether or not your router supports WPS,

there’s a simple way to nd out. The housing of the router must have a WPS button

(also called N-connect). If there’s no such button, you can stop reading this section

now because everything that follows would not be applicable to your network.

To begin, click on the Add WPS Prole button.

You’ll then see the screen below, presenting you with two choices:

• Push-Button Conguration (PBC)

• PIN / numeric code