User Manual Instruction Manual

Status: This eld displays the SSID and MAC ID of the network the

adapter is connecting to.

Extra Info: This eld displays the link status.

Channel: This eld displays the number of the radio channel and the

frequency used for the networking.

Link Speed (Mbps): These elds display the transmission (Tx) and the

reception (Rx) rates of the network. The maximum transmission rate

is 54 Mbps.

Throughput (Kbps): These elds display the speed of data being

transmitted (Tx) and received (Rx).

Link Quality: This status bar indicates the quality of the link. The

higher the percentage, the better the quality.

dBm: To display the signal strength measured in dBm (decibels in

milliwatts), click this box on the Network screen (see Page 9).

Signal Strength: This bar shows the signal strength level. The higher

the percentage being shown in the bar, the more radio signal being

received by the adapter. This indicator helps to nd the proper position

of the wireless device for quality network operation.

Noise Strength: This bar displays the noise level in the wireless

environment.

CONFIGURATION