User Manual User guide

6
HARDWARE
WPS button
Protective cap
Link/Activity LED
HARDWARE
COMPONENTS
LED INDICATORS
If the Radio On/Off function is turned off (see WPS Conguration), the
wireless LAN function is disabled and the Link/Activity LED remains
unlit. If the Radio On/Off function is turned on, the Link/Activity LED will
indicate the status of the function as indicated below.
INSTALLATION
WINDOWS 7
Windows 7 users should install the adapter using the steps in this
section. Users of other operating systems should refer to the next
section: For Operating Systems Other Than Win7.
1. Make sure your computer has a connection to the Internet.
2. Connect the USB adapter as outlined below in Steps 1 and 2 of the
next section: For Operating Systems Other Than Win7.
Function Status LED Indication
Radio on but Off Not linked to wireless access point or router
not linked Flashing Transmitting management information
Radio on; linked On Linked to wireless access point or router
to AP or router Flashing Transmitting data or management information*
* If WPS mode is activated, the LED will still ash.