User Manual User guide

AP / STA+AP

being connected to by unauthorized users.

Allow BW 40 MHz: Check this box to allow BW 40 MHz capability.

Tx Burst: Check this box to accelerate the data transmit rate. It may not

work with all wireless access points and wireless devices.

Default: Click to use the default value.

Apply: Click to apply the setting change(s).

SECURITY SETTING

This screen — accessed by clicking “Security Setting” on the previous

Conguration screen — lets you to congure the authentication mode

and encryption algorithm used within the AP.

Authentication Type: Four types of authentication mode are

supported and presented in the drop-down menu.

Pre-Shared Key