User Manual Owner manual

2-10-2 IP Address of the Wireless Access Point

You can change the IP address of this wireless access point so it

can become a part of your local network. Remember this address

or you won’t be able to connect the configuration menu of this

wireless access point.

The default IP address is 192.168.2.1; the subnet mask is

255.255.255.0. Press and hold “Reset/WPS” longer than 10

seconds to change the IP address back to the default value if you

forget the IP address you set.

To change the IP address, click System Utility on the left, and the

following message will be displayed:

Input the IP address and subnet mask in the corresponding fields,

and input the IP address of the gateway in the “Gateway Address”

field if you need to manage this wireless access point from another

network (like the Internet).

To activate the DHCP server function of this wireless access point,

select “Enabled” in the “DHCP Server” option, and refer to the next

section for detailed instructions; if you don’t want to use the DHCP

server function of this wireless access point, or if there’s another

DHCP server on the network that this access point connects to,

select “Disable.”