User Manual Owner manual

42
improve the performance of such network
applications.
CTS Protect
Enabling this setting will reduce the chance of
radio signal collisions between 802.11b and
802.11g wireless access points. It’s
recommended to set this option to “Auto.”
TX Power
You can set the output power of the wireless
radio. Unless you’re using this wireless access
point in a really big space, you may not have to
set output power to 100%. This will enhance
security (malicious/unknown users outside
the range will not be able to reach your
wireless access point).
After you finish with the settings, click “Apply” and the following
message will be displayed:
When you see this message, the settings you made are
successfully saved. Click “Continue” to go back to the previous
page and continue with other settings, or click “Apply” to restart the
wireless access point. Changes will take effect after about 30
seconds.