User Manual Manual
30
SoftAP
ACCESS CONTROL
This screen lets you congure the access control policy used within the
access point.
Access Policy: Select from the drop-down menu.
• Disable: Disables the MAC address ltering function.
• Allow All: Only wireless adapters with a MAC address on the access
list can connect to the AP.
• Reject All: Wireless adapters with a MAC address on the access
list will be prevented from connecting to the AP.
MAC Address: This is the unique 12-digit hexadecimal identication for
hardware devices in the network.
Access List: Displays all the MAC address that have been added.
• Add: Add the MAC address to the access list.
• Delete: Delete the selected MAC address from the access list.
• Remove All: Remove all MAC addresses from the access list.
Apply: Click to apply the setting change(s).
MAC Table