Manual

2
ENGLISH
Fast Ethernet Oce Switch • User Manual English
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
™
Fast
Ethernet Office Switch, Model 522595. For specifications, go to
www.intellinet-network.com.
CONNECTIONS
Plug the female end of the power adapter
firmly into the IN jack and the other end into
an electrical outlet. Confirm that the power
LED is lit. NOTE: To ensure proper operation,
use only the included power adapter.
•10/100autosensingportsautomatically
detect optimal network speeds; supports
 anycombinationof10Mbpsor100Mbpsnetworkdeviceswithfull/
half-duplex operation.
•AllportsontheswitchsupportAuto-MDI/MDI-Xfunctionality,so
 crossovercablesanduplinkportsarenotneededforconnectionsto
PCs, routers, hubs, other switches, etc.
 Cat5/5eUTP/STPcablesprovideoptimal
performance; if a status LED doesn’t
 indicatealinkoractivity,checkthe
 correspondingdeviceforpropersetupand
operation.
LEDs
LED Status Operation
POWER On Power on
Off Check connection
10/100M On 100Mbpsconnection
 O 10Mbpsconnection
LINK/ACT On Validportconnection
 Blinking Datatransmitted/received
Off No link established