Instruction Manual

2
ENGLISH
Fast Ethernet Rackmount Switch • User Manual English
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
™
Fast Ethernet
Rackmount Switch, Model 520409 (16-port) or 520416 (24-port). For specifications,
go to www.intellinet-network.com.
CONNECTIONS
• AllportsontheswitchsupportAuto-MDI/MDI-Xfunctionality,soyoucanusestraight
 orcrossoverUTP/STPcablestoconnecttheRJ45portstoPCs,routers,hubs,other
switches, etc.
• TheLEDindicators—Power,Link/Activity—makemonitoringandtroubleshooting
easier. If a status LED doesn’t indicate a link or activity, check the corresponding
device for proper setup and operation.
• Usetheincludedpowercabletoconnectthereceptacleonthebackoftheswitchto
a power outlet, and confirm that the Power LED lights.
PLACEMENT
Priortouse,itisrecommendedthattheswitchbeplaced/positioned:
• onalevelsurfacethatcansupporttheweightoftheswitch(andanyotheritems
 thatneedtobeconsidered);
• withaminimumof25mm(approx.1”)ofclearanceonthetopandsidesfor
 adequateventilation;
• awayfromsourcesofelectricalnoise:radios,transmitters,broadbandampliers,etc.;
• whereitcannotbeaectedbyexcessivemoisture;and
• within100m(approx.328’)ofnetworkdevicesit’stobeconnectedto.
Rackmount
Theswitchincludesbracketsandscrewsforoptionalrackmounting.
1. Disconnectanycablesfromtheswitch.
2. Positionabracketoverthemountingholesononesideoftheswitchandsecureit
in place with screws.
3. RepeatStep2ontheothersideoftheswitch.
4. Positiontheswitchintherackandscrewthebracketstotherack.
5. Reconnectanycables.
LED Status Operation
PWR On Power on
Off Check connection; turn power on
LNK/ On Valid port connection
ACT Blinking Data transmitted/received
Off No link established