- Intellinet Wireless Network IP Camera User's Guide
WIRELESS NETWORK IP CAMERA User’s Guide 
 58
The IP address is 
located within a 
different subnet 
Run the PING utility (as described in PINGing Your 
IP Address, on page 39), If the utility returns “no 
response” or similar, the diagnosis is probably 
correct – you should then proceed as follows 
In Windows 95/98 or Windows NT, check the IP 
address for your Wireless Network IP Camera is 
within the same subnet as your workstation: 
1.Click “Start”, “Settings”, “Control Panel” and 
“Network”. 
2.Specify the TCP/IP adapter and click on 
“Properties”. In Properties, Click “IP Address”. 
3.Check that the first 3 numbers within the IP 
address of your Wireless Network IP Camera 
matches the first 3 of your workstation. If not, your 
Wireless Network IP Camera may be on a different 
subnet and the IP address cannot be set from this 
workstation. You must set the IP address for 
Wireless Network IP Camera from a workstation on 
the same subnet. 
Other networking 
problems 
Trying replacing your network cable 
Test the network interface of the product by 
connecting a local computer to the unit, using a 
standard Crossover (hub-to-hub) Cable. 
If the above actions do not resolve the problem, 
Wireless Network IP Camera maybe faulty, In this 
case, try to localize the problem by connecting 
Wireless Network IP Camera to the serial port of a 
local computer, using the supported RS232 Cable 
The Power LED is not 
constantly lit 
Faulty power supply  Verify that you are using an provided power supply 
The network LED is off  Faulty cabling  1.To verify that the cables are functional, PING the 
address of a known existing unit on your network. 
2.If the cabling is OK and your network is 
reachable, your should receive the reply similar to 
this: 
 . . . bytes = 32 time = 2 ms, 
The operating status 
LED 
Faulty connecting  Verify that the power is well connected 
Your Wireless Network 
IP Camera works 
locally, but not 
externally. 
Firewall protection 
Default routers required
The internet site is too 
heavily loaded 
Check the internet firewall with your system 
manager 
Check if you need to configure the default router 
settings 
Configure Wireless Network IP Camera to upload 
your video images to an FTP server or an ISP 










