- Intellinet Wireless Network IP Camera User's Guide

WIRELESS NETWORK IP CAMERA User’s Guide
Time Configuration
This screen is to configure date and time.
1. Synchronized with NTP server
The Wireless Network IP Camera automatically configures Date & Time through the NTP
(Network Time Protocol) server. The NTP Server is based on Greenwich time. Select NTP
server, IP address and Time zone to set the date and time automatically, then press,
“SUBMIT”. It may not work due to the possible network error; in this case, you can select
other NTP server and IP address or you can set the date and time manually. Once Date & Time
configuration is set, you don’t have to configure again whenever you connect to the Wireless
Network IP Camera.
2. Set manually
Enter the Date and Time manually, then click “SUBMIT”.
3. Enable Daylight Savings
This is to configure the Daylight Savings Time
48