Wireless 802.
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™ Wireless 802.11n Broadband Router, Model 523967. This Quick Install Guide presents the rudimentary steps required to set up and operate this device. For specifications and more detailed instructions, refer to the user manual 1) on the CD enclosed with this product; 2) on the Web site listed below; or 3) in some cases, printed and enclosed with this product. Contact your INTELLINET NETWORK SOLUTIONS dealer with comments or questions, or visit www.
Package Contents Before you start to install and operate use this router, make sure the following items are enclosed; otherwise, contact your dealer for assistance. • Broadband router • A/C power adapter • Ethernet Cat5 RJ-45 cable: 1.0 m (3 ft.) • Quick installation guide & user manual CDROM Installation 1. Connect your DSL or cable modem to the WAN port of the router using the provided RJ-45 Ethernet cable.
3. Connect the A/C power adapter to the wall socket, and then connect it to the power socket of the router. 4. Check all LEDs on the front panel. The PWR LED should be on, and the WAN and LAN LEDs should be on if the computer or network device connected to the corresponding router port(s) are powered on and correctly connected. 5. Connect your computer to one of the LAN ports of the router, then activate the network connection. Start the Web browser — e.g.
NOTES
INTELLINET NETWORK SOLUTIONS™ offers a complete line of active and passive networking products. Ask your local computer dealer for more information or visit www.intellinet-network.com. Copyright © INTELLINET NETWORK SOLUTIONS All products mentioned are trademarks or registered trademarks of their respective owners.
