Cut Sheet

Fits any Intellinet Gigabit Ethernet switch with SFP module slots, or any MSA or Cisco
compliant SFP port
Data transfer rate: 10 Gbps
One 10GBase-SR multi-mode Fiber LC duplex port
Fiber distance support: up to 300 m (984 ft.)
Wavelength: 850 nm
Compliant with the SFP Multi-Source Agreement (MSA)
Cisco compatible
SFP+ standard form factor
Supports digital diagnostics monitoring (DDM)
Low EMI due to fully metallic housing
Up to 11.1 Gbps bi-directional communication
Supports hot-plugging
Three-Year Warranty
Specifications:
Standards
• IEEE 802.3z (Fiber Optic Gigabit Ethernet)
• IEEE 802.3ae (Fiber Optic 10 Gigabit Ethernet)
General
• Media support: 10GBase-SR multi-mode fiber
• Connector: Fiber LC duplex port
• Distance:
- 300 m (984 ft.) with 50/125 µm cable on 2000 MHz-km
- 33 m (108) with 62.5/125 µm cable on 200 MHz-km
• Wavelength: 850 nm
• Fiber power budget:
- Maximum TX power: -1 dB
- Minimum TX power: -5 dB
- Sensitivity: -12 dB
- Power budget: 7 dB
• Design: SFP+ (enhanced small form-factor pluggable), 11.1 Gbps max, 10.3 Gbps typical
• SFF-8472 Diagnostic Monitoring Interface for Optical Transceivers
• Certifications: FCC Class A, CE Mark, IEC-60825, RoHS
Power
• Power requirement: 3.3 V
• Power consumption: 1.0 Watt (maximum)
Environmental
• Dimensions: 57 (L) x 14 (W) x 12 (H) mm (2.24 x 0.55 x 0.5 in.)
• Weight: 37 g (1.3 oz.)
• Operating temperature: 0 – 70°C (32 – 158°F)
• Operating humidity: 10 – 85% RH, non-condensing
• Storage temperature: -40 – 85°C (-40 – 185°F)
For more information on Intellinet products, consult your local dealer or visit www.intelllinet-network.com.
All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and
reproduction of this document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.