User manual

ManualsBrandsIntellinav ManualsCar navigation systemsGPS Receiver UM_IN-KIG02-112706.QXD

Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 2

Summary of content (60 pages)

PAGE 1
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.
PAGE 2
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 3 Table of Contents Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Mounting the Intellinav System . . . . . . . . . . . . . . . . .5 Starting Intellinav . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Getting GPS Signal . . . . . . . . . . . . . . . . . . . . . . . . . .6 Car Cursor . . . . . . . . . .
PAGE 3
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 4 Intellinav 3 User’ s Manual Shuffle Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Repeat Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Playback Volume . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Photo Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Full Screen Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Magnification . . . .
PAGE 4
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 5 Getting Started Congratulations on your purchase of the Intellinav 3 system. Your Intellinav system can guide you to the destination of your choice using signals from Global Positioning Satellites (GPS) orbiting the earth. There are 24 GPS satellites orbiting the earth. A GPS device can calculate your position on the earth if it can receive signals from at least three of these satellites.
PAGE 5
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.
PAGE 6
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 7 Mounting on the Windshield Mounting the Cradle and GPS 1. Clean the surface of the windshield using rubbing alcohol. 1. Insert the GPS unit bottom in first, and then lock it using the lever on the top. 2. Press the suction cup firmly against the windshield. 2. Adjust the angles of the arms to achieve the best viewing position. 3. Press down the lever to fix the suction cup in place.
PAGE 7
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 8 Starting Intellinav first GPS fix is obtained, thereafter, it should normally take no more than 30 seconds to 1 minute to obtain a valid GPS fix. Tap Navigation. A warning screen appears. There are 3 ways to view the state of the signal: Tap I Agree after you have read and agreed to the warning.
PAGE 8
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd GPS Information 2007/8/20 ⁄U⁄¨ 03:02 Page 9 If you need to enter numbers, tap the 1-2-3 button, and the numeric keyboard appears: To view the GPS information: 1. Tap Menu 2. Tap Information. 3. Tap GPS Information. The GPS Information screen appears. Entering Data on the Intellinav System The Intellinav system doesn't have a physical keyboard. Instead, you tap the screen to enter data.
PAGE 9
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 10 Working with the Map The Intellinav system gives you many ways of looking at the map. You can see your current position, view any of the turns on a route, or pan the map to view other areas. You can zoom in and out, and find information about specific locations. The map view on the Intellinav system shows your current location.
PAGE 10
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 3D Map View You can change the perspective of the map display to 3D or bird’ s eye view. To change to 3D view: 1. Tap Menu. The Main Menu appears. 2. Tap Settings. The Settings screen appears. 3. Tap Display Options. The Display Option screen appears. 4. Select from 2D, High, Medium and Low, which represents the inclination of the 3D map display. 2007/8/20 ⁄U⁄¨ 03:02 Page 11 To view the route list: 1. Tap Menu. The Main Menu appears. 2.
PAGE 11
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd From the Information screen you have several options: Set Start Location Set Destination Save This Location Information You can also get additional information about the current location, including latitude and longitude. Page 12 POI Information To view information about a POI on the map, tap on the icon on the map. The POI(S) screen will appear. Screen Tap Areas Tap in designated areas on the map display for shortcuts to handy functions.
PAGE 12
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 13 Entering Your Route You can set a destination with the Intellinav system many different ways. Once you have set a destination, you can add a detour or a stopover. Nav calculates the route from your current location (or the location you set as a starting point) to the destination.
PAGE 13
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2. Tap Destination. The Set Destination screen appears. 2007/8/20 ⁄U⁄¨ 03:02 Page 14 appears. 8. Select the address that matches the location you want to go to and tap Nav. The map appears, and the guidance directions begin. 3. Tap Address. The Input Method screen appears. Intellinav 3 User’ s Manual To Enter an Address as a Destination Using City First: 4. If you need to change the region: 1. Tap Menu. The main menu appears. a.
PAGE 14
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 6. Tap the Letters to enter the name of the City. Tap OK when you have selected the City. The Enter Street Name screen appears. 7. Tap the Letters to enter the name of the street. Tap OK when you have selected the street. The Enter House Number screen appears. 8. Tap the Numbers or Letters A-D to enter the house number. Tap OK. The Select Address screen appears. 9. Select the address that matches the location you want to go to and tap Nav.
PAGE 15
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd The Select Address screen appears. 8. Select the intersection that matches the location you want to go to and tap Nav. The map appears, and the guidance directions begin. ⁄U⁄¨ 03:02 Page 16 appears. 6. Tap the Letters to enter the name of the city. Tap OK when you have selected the city. The Enter Street screen appears. 7. Tap the Letters to enter the name of the street. Tap OK when you have selected the street.
PAGE 16
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Using a Point of Interest (POI) as a Destination There are over 6 million points of interest that you can select as a destination. Generally, you choose a category and then choose one of four methods of selecting the specific point of interest. Sometimes you must first select a subcategory before you can choose a selection method. The four methods of selecting a specific point of interest include two for nearby POIs and two for all POIs in a region.
PAGE 17
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd To select a nearby POI from an alphabetical list: a. Tap Alphabetical. The Enter POI Name screen appears. 2007/8/20 ⁄U⁄¨ 03:02 Page 18 To select a nearby POI by distance: a. Tap By Distance. The POI List screen appears, listing the closest POIs first. Intellinav 3 User’ s Manual b. Tap the Letters to enter the name of the POI. c. Tap OK when you have selected the POI. The POI Select screen appears, displaying the address of the POI. b.
PAGE 18
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd To select from all POIs in a region or State: 1. Tap List All. The Enter POI Name screen appears. 2. Tap the Letters to enter the name of the POI. Tap OK when you have selected the POI. The POI Select screen appears. 3. Tap Nav. The map appears, and the guidance directions begin. To select a POI by city: 1. Tap By City. The Enter City Name screen appears. 2. Tap the Letters to enter the name of the city and tap OK. The Enter POI Name screen appears.
PAGE 19
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Using a Recent Destination as a Destination 1. Tap Menu. The main menu appears. 2. Tap Destination. The Set Destination screen appears. 3. Tap Recent. The Recent screen appears. 4. Tap on the recent destination you want to go to and tap Nav. The map appears, and the guidance directions begin.
PAGE 20
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd To select from an alphabetical list: a. Tap Alphabetical. The Enter City Name screen appears. b. Tap the Letters to enter the name of the city. Tap OK when you have selected the city. The City Center screen appears. c. Tap Nav. The map appears, and the guidance directions begin. To select by distance: a. Tap By Distance. The City List screen appears, listing the closest city centers first. b. Tap the city that you want to go to and tap Nav.
PAGE 21
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 22 Detours, Avoid Roads, and Stopovers Detour The Detour feature will allow you to bypass a certain portion of the route starting at your present position, while avoid road allows you to bypass the entire road. Stopovers are stops you add to a trip to make prior to reaching your destination. NOTE: you cannot create a detour if you do not have a current destination To set a detour: Intellinav 3 User’ s Manual 1.
PAGE 22
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Avoid Road Once you have set a destination you can look at the list of streets and determine if you need to mark one or more as unavailable. If you mark a section as unavailable the Intellinav system will calculate a new route that avoids the section you marked. NOTE: You cannot avoid a road if you do not have a current destination. To avoid roads in the route list: 1. Tap Menu. The main menu appears. 2. Tap Destination.
PAGE 23
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Stopover Once you have set a destination you can add a stopover. Adding a stopover does not cancel your original destination. Once you reach your stopover, you will be prompted to continue to the original destination. 1. Press Menu. The main menu appears. 2. Tap Destination. The Destination Options screen appears. ⁄U⁄¨ 03:02 Page 24 To cancel a stopover: 1. Tap Menu. The main menu appears. 2. Tap Destination.
PAGE 24
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Setting an Itinerary The Itinerary feature allows you to set multiple destinations. You can add, remove, or re-order destinations according to your needs. To set the Itinerary: 1. Tap Menu. The main menu appears. 2. Tap Itinerary. The Itinerary screen appears. 3. Tap Add to add new destinations from Favorites, Recent or POI list, or enter a new address as destination. 4. Tap Del to remove a destination from the Itinerary. 5.
PAGE 25
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 26 Managing Your Favorites List You can edit the destinations you add to your Favorites list to give them descriptive names. You can also remove destinations from your favorites list. To manage your favorites list: Intellinav 3 User’ s Manual 1. Tap Menu. The main menu appears. 2. Tap Favorites. The Favorites screen appears. To delete a destination from your favorites list: a. Tap on the favorite you want to delete. b.
PAGE 26
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 27 Getting Information To access the Information screen: 1. Tap Menu. The main menu appears. Route List Provides detailed turn-by-turn maneuver information of your current route. If you have not set a destination, the route list will be empty. 2. Tap Information. The Information screen appears. Current Location Provides detailed information about your current location.
PAGE 27
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 28 System Information Provides software revision number and copyright information. Almanac Provides information related to the sun and the moon, based on your current geographic location. GPS Information Provides information related to GPS signal strength, coordinates, date and time. Intellinav 3 User’ s Manual Trip Information Provides information such as average speed and distance traveled.
PAGE 28
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 29 Traffic Pattern Traffic pattern is a database of typical hour-by-hour traffic speeds on over 170,000 miles of primary and secondary roads across major US cities. Historical observations from GPS probe data are aggregated and verified to provide 3. Tap Route Options. The Route Options screen appears. 4. Tap Pattern. The route method changes to Traffic Pattern.
PAGE 29
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 30 Using Tools Arrival and Departure Time Calculation Tap Departure Time or Arrival Time. The Day and Time screen appears. For example, if you want to leave at certain time, you can estimate the time of arrival at your destination. Conversely, if you want to arrive at your destination at certain time, you can estimate when you need to leave. 5. Enter the day of the week and time of departure or arrival. 6.
PAGE 30
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 31 Parked-car Locator 2. Tap Tools This feature is useful when you park your car in a large open area such as inside a theme park, or on a street nearby a tourist attraction or shopping center. 3. Tap Parked-car Locator 4. Wait about 30 seconds for the device to acquire GPS signal, or until the foot-cursor on the map display turns green.
PAGE 31
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 32 Setting Your Options You can set many different options to customize the Intellinav system and make it work your way. These options include: Route Options Language Options Localization Options System Options Safety Options Display Options The display options give you control over the appearance of the map. You can change the following: Orientation Guidance Day/Night Color 3D View There are two orientation settings.
PAGE 32
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd icons are displayed. If you choose custom, you can choose which categories of POI icons you want displayed. The color settings control the background color of the map. You can choose from four different colors. The 3D view settings control your view of the map. Off shows you the map in traditional 2D mode. High, Medium, and Low show you a 3D version of the map, with a different angle for each value.
PAGE 33
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 34 Route Options based on historic traffic data (see Traffic Pattern section). The route options give you control over the navigation of your trip. You can change the following: Walking enables pedestrian walking mode. Method Toll Roads Intellinav 3 User’ s Manual Ferries The ferries setting indicates whether ferries should be included when your route is calculated.
PAGE 34
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd To set your route settings: 1. Tap Menu. The main menu appears. 2. Tap Route Options. The Route Options screen appears. 3. Tap your Method preference: Quickest, Major, Shortest, Local, Pattern or Walking. 4. Tap your Ferries preference: Include or Exclude. 5. Tap your Toll Roads preference: Include or Exclude. 6. Tap your Carpool preference: Include or Exclude. 7. Tap your Turns preference: Reduced or Normal. 8.
PAGE 35
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd To set the speed alert: a. Tap Auto. A warning appears. b. Tap Confirm to close the warning. To set a fixed speed alert: a. Tap Fixed. b. Enter the speed you want to use as a maximum speed. c. Tap OK to set the speed. d. Tap OK. You return to the map. ⁄U⁄¨ 03:02 Page 36 Fog Assist One of the hazzards of driving in dense fog condition is not being able to see an upcoming intersection.
PAGE 36
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 37 Language Options TTS (Text-to-Speech) Options The language options allow you to configure the following: Off - Voice prompts will not include street names. Language Mixed - Voice prompts will be in recorded human voice, but street names will be in computer synthesized voice. TTS (Text-to-Speech) There are six language settings.
PAGE 37
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Localization Options The localization options give you control over the settings affected by your location, including: Time Zone Units There are six time zone settings, for all areas of the United States. There are two daylight-savings options, to determine whether or not daylight savings time is currently in effect at your location. There are two settings for systems, which determine how the distance to your location is expressed.
PAGE 38
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 39 System Options Screen Calibration User Preferences This process ensures that when you tap the screen, the item tapped is activated. You can adjust the settings of your device to suit the way you work. Adjusting certain settings, such as those for system volume and backlight may increase your standby time. To calibrate the screen: 1. From the Main Menu, tap on System and then System Info.
PAGE 39
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Tap to set the screen backlight level and enable its auto off function. Tap to adjust the volume level and toggle tapping sound. ⁄U⁄¨ 03:02 Page 40 Volume To set the system sound level: 1. Tap - /+ to adjust the volume level. 2. Tap to apply the changes made. Intellinav 3 User’ s Manual Tap to set the language option for the system menus. 2007/8/20 Tap to displays your device's OS Version, GPS F/W, and SW Code Version.
PAGE 40
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Backlight 2007/8/20 ⁄U⁄¨ 03:02 Page 41 System Info To set the screen backlight level: 1. Tap -/+ to adjust the screen backlight level. 2. Tap to apply the changes made. To set the screen backlight auto-off function: 1. Tap -/+ next to the Battery and External Power settings. Options include: Always On, after 10 seconds, after 30 seconds, after 1, 2 or 3 minutes. 2. Tap 39 Intellinav 3 to apply the changes made.
PAGE 41
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 42 Factory Reset GPS Reset To perform a soft reset: In the following circumstances, the TTFF (Time To First Fix) values of your device may be longer than usual: 1. Hold the device securely, and then press the soft reset button on the bottom of your device. If you still encounter problems even after soft resetting the device, loading the factory default settings may correct the problems.
PAGE 42
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd To Reset the GPS: 1. Close the navigation program, if it is currently running, by tapping on Menu in the map display, and then Exit in the navigation Menu screen. 2. Tap System on the Main Menu panel. 3. Tap System Info on the System panel. 4. Tap GPS Reset and then Yes to confirm. 5. The GPS Reset process will take about a minute to complete.
PAGE 43
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 44 MP3 Playback 4. Tap Up-One-Level button to return to the root directory. To open the MP3 Player: 5. The selected file will automatically be played. Files in the same directory will also be played, provided the repeat function is disabled. 1. Tap MP3 on the Main Menu panel. The MP3 player appears. To open MP3 files for playback: 1. Tap the Folder button to open the file browser.
PAGE 44
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 45 Shuffle Mode Each directory containing supported music files is considered a playlist. You can choose to shuffle the playback sequence to play files in random order. To rearrange the playback sequence: 2. To disable the Repeat mode, tap the fade-out Repeat icon. 3. Tapping Random icon will automatically disable the Repeat mode. 1. To enable the Shuffle mode, tap (Random).
PAGE 45
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 46 Photo Viewer With the Intellinav system, you can keep images of your favorite moments as mobile as you are by using the Photo Viewer. You can use a computer to load pictures onto an sd card and then load that sd card into the SD card slot located at the side of the system. The program features: June 24" for a sub-directory consisting of pictures taken during that period.
PAGE 46
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 47 Full Screen Mode Magnification In Full Screen mode, image files can be viewed in a larger scale. You can also change its orientation angle. To change the image magnification level: 1. Tap (-) to zoom into the center of the image. To view images in Full Screen mode: 1. Search for the file you want to view. 2. Tap / a. When in a zoomed-in state, you can hold and drag the image to pan it in any direction you want.
PAGE 47
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 48 Slide Show You have the option to view images in a slide show much like viewing a presentation. Images are adjusted to fit the entire display area and are shown in a 3-second interval. Intellinav 3 User’ s Manual To enable the Slide Show mode: 1. In Thumbnail or Full Screen mode, tap Show). (Slide 2. Tap the touch screen to stop the slide show and return to the previous viewing mode.
PAGE 48
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 49 Safety and Regulation FCC Declaration of Conformity Tested to comply with FCC standards for home or office use This equipment complies with Part 15 of the U.S Federal Communications Commission (FCC) Rules. Operation of this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
PAGE 49
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 50 Software License Agreement registrations are owned by the USPS: United States Postal Service, USPS, and ZIP+4. Intellinav 3 User’ s Manual The mapping and navigation software ("Software") and map data ("Data") is provided for your personal, internal use only and not for resale.
PAGE 50
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 51 NUANCE (Text-To-Speech) END USER LICENSE AGREEMENT a. License Grant. Netropa grants to End User a nonexclusive, non-transferable right and license to use the Nuance Software on a single Netropa Product. b. Ownership of Nuance Software.
PAGE 51
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 52 TERMS AND CONDITIONS Personal Use Only You agree to use this Data together with the Intellinav system for the solely personal, non-commercial purposes for which you were licensed, and not for service bureau, time-sharing or other similar purposes.
PAGE 52
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd No Warranty This Data is provided to you "as is," and you agree to use it at your own risk.
PAGE 53
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Governing Law The above terms and conditions shall be governed by the laws of the State of Illinois [insert "Netherlands" where European NAVTEQ Data is used], without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded.
PAGE 54
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.
PAGE 55
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 56 Caring for your device Please use only the power adapter included in the box and connects to the voltage requirement indicated on the rear panel of the product. Use of any other types of chargers will result in malfunction of the device and void all warranties.
PAGE 56
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 57 Important Information When using Intellinav 3, please make sure you are operating the device in compliance with all local, state, and federal regulations. It is the sole responsibility of the driver of the vehicle to operate the vehicle in a safe manner and not become distracted by Intellinav. User should not operate the controls of Intellinav while you are driving. Netropa shall not be liable for any accident.
PAGE 57
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 58 Intellinav 3 User’ s Manual affixing and or applying any objects such as suction mounts on the windshields. Other dashboard or friction mounting options should be used. Intellinav does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. California Vehicle Code Section 26708(a) Minnesota Statutes 2005, Section 169.
PAGE 58
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 59 System Specifications The Intellinav 3 has the following specifications: Warm Start: 38 sec., average SiRF Star III GPS chipset Cold Start: 42 sec., average SAMSUNG S3C2412 266Mhz CPU 180+ g Weight 64 MB NAND flash + 64 MB SDRAM onboard Dimensions: 100 x 80 x 22mm / 4 x 3.2 x 0.9inches 3.5-inch 16.
PAGE 59
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 60 Intellinav 3 User’ s Manual Netropa Corporation 1499 Huntington Dr. Suite 305 South Pasadena, CA 91030 Office 888.628.0663 http://www.intellinav.