User Manual

ADVANCED OPERATION 
Zeroscope 1U offers several advanced display and triggering options, located within an Advanced
Settings menu.
1. Long-press (>1 sec) the encoder to open the Advanced Settings menu.
A small menu of options
appears to the right of the
display.
2. Turn the encoder to select
and highlight which of six
Advanced Settings
options you wish to edit.
There are six options
accessible in this menu.
These are, from
top-to-bottom:
● SCOPE type
● TRIGGER Source
● TRIGGER DETECTION LEVEL
● CH 1 offset
● CH 2 offset
● GRID display
3. With the desired option highlighted, push-turn the encoder to edit its value.
That is, turn the encoder while it’s fully depressed to change values. The following sections
discuss each advanced operation in detail.
Scope Type 
With this option selected, push-turn the encoder to select what you want displayed on the
Zeroscope. There are three options:
Scope Standard graphical display, with time displayed on the X-axis and voltage displayed
on the Y-axis.
X-Y Alternate graphical display with CH 1 driving the X-axis and CH 2 driving the Y-axis.
Tune Alphanumerical tuning display, which you can configure to show either Hz values or
note names (see below).
Zeroscope 1U Manual 8