User Manual

Copying Patterns 
You can copy the pattern from one track to another (without copying its edit parameters). To do so:
1. Press the SELECT button to enter Select Mode.
2. Hold the button corresponding to the track you want to copy from (A, B, C or D).
3. While holding the source track’s button, press the button corresponding to the track you want to
copy to (A, B, C, or D).
The display flashes rapidly.
4. Release both buttons.
You have now copied the pattern from one track to another. Note that this only copies that
pattern itself. Various edited parameters (such as Swing, Probability, etc) are not copied.
Copying Pages 
Similar to the way you can copy patterns from one track to another (described above), you can also
copy from one Track Page to another. Copying pages is useful if, for example, you originally created
a one page pattern, decide to extend its length to two pages, and wish to copy the pattern from the
original page to the second page.
1. Press the SELECT button to enter Select Mode.
2. Hold the button corresponding to the page you want to copy from (1, 2, 3 or 4).
3. While holding the source page’s button, press the button corresponding to the page you want to
copy to (1, 2, 3, or 4).
The display flashes rapidly.
4. Release both buttons.
You have now copied the pattern from one page to the other.
NOTE : Copying pages does not automatically extend the pattern length. For example, if you have a
one page pattern that ends on Step 16, copying Page 1 to Page 2 will not automatically extend the
pattern length to 32 bars. If you wanted the pattern to now play for 32 steps, go to Page 2 (by
holding down the SELECT button while clicking the PAGE 2 button), then long-press (>1 sec) the
16th button (bottom-right) to define that step as the “final step” in the pattern. In this case, because
we’re on Page 2, the 16th button corresponds to Step 32.
Steppy 1U Manual 36