User Manual

5. Edit additional steps by pressing the desired multifunction (step) button; setting its value using
the buttons in the opposite row, then re-pressing the same multifunction (step) button to exit the
Parameter Edit mode.
TIP : You can copy one step's value to another by holding down the step button you want to
copy while pressing the step button to which you want to paste it.
6. To exit Step Edit mode, long-press the EDIT button again.
NOTE: When you assign a step's parameter value to the lowest option, it will instead defer to the
track's global parameter value for that step, rather than use the minimum parameter value. For
example, no matter what the track’s global probability value is set to, you can override that value on
individual steps by pressing any of the the row’s right-most 7 buttons (which correspond to 33, 50,
66, 75, 87.5, and 100% probability). However, if you press the first parameter value (12.5% in this
case), then the step uses the track’s global probability setting rather than 12.5%.
 
Steppy 1U Manual 31