User Manual

For example, assume this is your current pattern:
If Loopy ( ) is active, pressing one button loops playback of that single step, repeating it
over-and-over for as long as you hold the button. The button is red because red indicates the
current playback position, which is endlessly repeating on a single step. The other buttons are
yellow indicating they are programmed into the pattern, but are not within the currently playing
loop:
If Loopy ( ) is active, pressing two buttons loops playback between those steps, inclusive of
the buttons you hold. So in the following example, Steps 1-4 loop for as long as you hold the
buttons. Again, buttons outside the currently playing loop are yellow to indicate they are
programmed into the pattern, but are not within the currently playing loop:
The standard Track position continues to advance normally as a loop plays. This means, when
you release the buttons, the pattern reverts to playing exactly the step it would have played had
you not looped a section.
Steppy 1U Manual 18