User Manual

[2] TRACK buttons
When in Select mode, these four buttons select which of the four tracks (A, B, C or D) you wish
to display/edit. A yellow button indicates the selected track.
[3] PAGE buttons
When in Select mode, these four buttons select which of the four pages (1, 2, 3, or 4) you wish
to display/edit. Each page displays 16 steps at a time, meaning there are a total of 64 available
steps per pattern. A yellow button indicates the selected page. A flashing yellow button
indicates that the pattern’s last step is on that page.
[4] MUTE buttons
When in Select mode, these four buttons function as Track Mutes for the track immediately
above it. In other words, the left-most button mutes/unmutes Track A ; the next-to-left button
mutes/unmutes Track B ; etc. When a Track is muted, the corresponding Mute button turns
yellow .
[5] PAGE FOLLOW button ( )
When in Select mode, press this button to enable the Page Follow function. Page Follow is on
when the button glows yellow .
If Steppy is in Play mode and currently playing a Track that extends across multiple pages (that
is, it’s longer than 16 steps), then activating Page Follow allows Steppy to update its display to
“follow” the page changes.
NOTE: If you’re in Select mode and you press a Page button to select a page, Steppy will
automatically turn off the Page Follow function, enabling to you make the desired changes to
the selected page.
[6] LOOPY button ( )
When in Select mode, press this button to enable the performance looper feature (“Loopy”).
When Loopy is active, its button glows yellow .
When Loopy is activated, Steppy gives you the ability to loop small segments of a larger pattern
when you’re back in Play mode. Specifically, playback will loop between any two buttons you
hold while in Play mode. If you hold only a single button down, that single step will repeat until
you release the button. When Loopy is active, the yellow Select LED and red Edit LED flash
rapidly back-and forth. If Loopy is active and you hold a pair of buttons in Play mode (to create a
loop), the gates within the loop will have green buttons and gates outside the loop will have
yellow buttons.
Steppy 1U Manual 17